Type RS BOV Quick question...

[Drty_Jrze]

Is the Greddy type RS BOV able to be recirculated? Tx

[2_Liter_Turbo]

Yes. They make a kit for the DSM cars. Just buy that, and make your own hose. I went to a machine shop to have a fitting made (before the kit came out) for my friends 2G eclipse.

[AZhitman]

You don't even need a fitting.

Remove the anodized "horn" (it unscrews) and run a hose from the BOV to the intake (after the MAF).

[Drty_Jrze]

thanks appreciate it.

[2_Liter_Turbo]

How would you put the hose on it without a fitting? There is no place for a hose to go around it.

[AZhitman]

Sure there is.

There is a short "pipe" sticking out, which the "horn" threads onto.

I have mine set up that way - slide the hose on and put a hose clamp on it.

[2_Liter_Turbo]

I don't know how you got a hose and clamp on that man. Im looking at it right now, and I can barely put my finger nail on it (I am talking about; without the blue nozzle on). If you get a chance, post a pic of the hose on it. I want to see

[D1 guy]

dude just adjust it hard and you wont have to recirculate it. Its so much easier that way.

[AZhitman]

I don't know how you got a hose and clamp on that man. Im looking at it right now, and I can barely put my finger nail on it (I am talking about; without the blue nozzle on). If you get a chance, post a pic of the hose on it. I want to see

Will do - probably this weekend...

It's in the worst spot (behind the left grille).

[2_Liter_Turbo]

no prob man. Im just curious.

[Hellion240sx]

mines is basically underneath but past the mafs. what do you adjust it with? cuz i was supposed to have a recirc kit and was supposed to get it a little while after my swap, but i never heard anything about it. so i WAS going to buy an safc2 but again the katrina issue has set this back too! im at a shleter so hopefully i they have some tools i can use

[Luke]

how hard would it be to find a piece of pipe the same size and thread as that horn. Just a piece to make it big enough to clamp a hose on.

[2_Liter_Turbo]

that's what I did. But there is no way (at least no way that I can figure out) to put a hose on it without making something that will thread in.