turbo slut

[jetblacknismo]

ok here it is ...

bone stock ka24e ina hardbody7lbs of turbo boost260 horsepower

is that possible or b.s. ?

[:: orion ::]

260 rear wheel horsepower...not at 7psi, unless it's a T66 or biger.

More like ~215-225rwhp at that boost from a KA-E.

- Brian

[jetblacknismo]

im trying to find out if a guy on here is being staight with me. not that hes trying to decieve me. he might just be a little off on his numbers. he says double the hp on a stock ka24e with a turbo kit that he is trying to sell. 1850 bucks shipped.

[Ubernoober]

A kind of quick and stupid rule of thumb is to simply take the Pressure Ratio and multiply times the original power to find out how much power you will make. This is a VERY ROUGH ESTIMATE and is only useful for approximations.

Your original HP = 150 (give or taker a little)

7.5 PSI = PR of 1.5 = 150 x 1.5 = 225 HP Under ideal circumstances

15 PSI = PR of 2.0 = 150 x 2.0 = 300 HP Ideally.

I think you can take it from here.

[Thee 240sx Owner]

no with 7psi you'll make under 230hp but your torque will almost equal if not exceed your hp which is what you want.. which is what most KA's do because of their bore and stroke