turbo manifold from enjuku?

Post by **chrispy** » Thu Jul 03, 2003 4:10 pm

i was wondering if anyone has had any problems with the Stainless Steel Bottom Mount Turbo Manifold from Enjuku? I am drawn and somewhat uneasy about its low price( 300) . I know you get what you pay for , but it looks pretty good for what i plan to run. so any input/insight would be helpful .

Post by **chrispy** » Thu Jul 03, 2003 4:10 pm

Post by **ItzGenX** » Thu Jul 03, 2003 4:10 pm

I would sugest askin enjuku. Why would they sell something defective. They should give you an honest answer if they wanted to keep a customer.

Post by **Cyberkreig** » Thu Jul 03, 2003 4:10 pm

If i were you i would ask Mattback of Secret Services

Post by **chrispy** » Thu Jul 03, 2003 4:10 pm

yeh i just went over to the FA boards and did some searching. Things i found out was that people said it was the same/or is the OBX manifold, and obx= crap. so i decided to stick with the cast Iron. Also cyberkreig , do you know how to disable the stock recirc. valve so i could use an atmospheric one? i remember you asking something like this a little while back.

Post by **Cyberkreig** » Thu Jul 03, 2003 4:10 pm

it looks to me, that if you have a bov, and need to disable (but not remove) the Recirc vavle, simply unhook the Vac line. I dont honestly remember what my questions was. =/

Post by **strikingimage240** » Thu Jul 03, 2003 4:10 pm

i know someone who bought the obx manifold and it had a hole in it, then was rewelded then cracked. Also for the bypass valve removal, i just turned some steel block off plates on a lathe. THey are about one inch long and plug the stock piping nicely. Hope that helped

Post by **chrispy** » Thu Jul 03, 2003 4:10 pm

hmm , strikingimage240 any pics of that?

Post by **slw240sx** » Thu Jul 03, 2003 4:10 pm

chrispy, you lookin for a mani?? i have a friend selling a project silvia mani i think it is. hes also got a big28 for sale, the turbo is 800$ never used since rebuild and manifold i think is 200$ mounted but never had the car runing

Post by **chrispy** » Thu Jul 03, 2003 4:10 pm

can i grab some more info on that big 28 and manifold , email me at [email protected]

I am planning on running a gt2835 , and maybe sticking with the cast iron manifold because it wont crack.

Post by **Unnatural** » Thu Jul 03, 2003 4:10 pm

That manifold sounds like it could be a $300 exhaust leak judging by the price, but I could be wrong. Are you planning on BIG HP figures? If not I'd keep the stock cast manifold and forget the headaches.~Brendan

turbo manifold from enjuku?

turbo manifold from enjuku?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums