turbo kit installed - need help with elbow cat removal!

[canadians14]

Hey guys, i have finished my turbo install and am expecting my JWT ECU back within the next couple days so naturally i am already looking for more upgrades to do The turbo kit is a Turbonetics/FMax "stage 2" with 50lb MSD injectors, JWT fuel rail, and T3/T4 turbo (50trim .63 A/R stg 3 wheel). All in all its been a good kit with quality parts and decent IC pipe routing. The hardware they provided was not always the best (or even included) and many different fasteners and clamps were needed but it was expected and will all be worth it when she fires up for the first time My least favourite part of the kit is the 2.5 in "downpipe" that is used to connect the turbo to the inlet of the "elbow cat". This pipe seems way too small for a downpipe and i am having troubles finding any 2.5" piping that would bolt up to it. I have seen some nice custom piping jobs that other people have done but where i'd prefer to stick with a readily made part. What i am ideally looking for is a 2.5" pipe that would go from the elbow cat to the inlet of the second cat and so far i have not been able to find it available for sale. Has anyone used this pipe or seen it for sale somewhere ??

As a side note to anyone looking to buy the Turbonetics Kit in the future, i read in an old post somewhere that turbonetics might be able to make you a 3in turbo to elbow cat section which would allow you to bolt on the popular 3in SR downpipe for even better flow!