turbo/intercooler install

[lancet913]

I pulled the motor/trany, installed the new clutchmasters clutch, had the oil return bung welded, installed new DW 550cc injectors, and a few other odds and ends.I hit a little snag with a exhaust mani stud that broke off in the head. What a PITA, i broke an easy out off it the stud but eventualy got it out. I ended up helicoiling the head due to me damaging the threads.It's not complete yet but very close.specs:t3/t04e a/r .48raptor bov550cc DW injectorsz32 mafjgs starter kithallman BCgodspeed FMICaem widebandclutchmasters stage 3JWT tune

On with the pics..........

i ordered a 90 degree coupler to finish off the hot side pipesmy pcv set upintercooler set upbottom mountspassenger side pipesdrivers sidecold side going to the TBThis intercooler kit is a Godspeed ka24de kit sold on ebay. There is a lot of bends but no need to relocate the battery.I hope to have it complete next week, had to order a few parts and i need a couple of things welded. I will update when it's running.

[motoman399]

looks nice. i may have to get that IC kit.

[oz240red]

Neat adapter for the vac lines. Where do you get one like that?

[Logan76]

Thats just a vaccum block you put before the check valve on the vaccum line to your brake booster, JGS sell's them, Full-Race sells em, You can find them all over the place man.

[SX APPEAL]

Pardon my ignorance, but what is the silver canister thing with the two lines going to it on the left hand side of the second picture?

[GTR PrYdE]

Pardon my ignorance, but what is the silver canister thing with the two lines going to it on the left hand side of the second picture?

looks like an oil catch can

[lancet913]

yes it is a oil catch can, I will have another one from the valve cover to the turbo intake.