Turbo Intake

[Asia989]

I want to get rid of my stock crapness and go to a metal intake for the turbo but the ones im looking at would make contact with my bov

[PapaSmurf2k3]

Well, you can make your own, or move your blow off valve (Or keep looking to see if you can find any pre-fabbed ones that won't hit).

[Asia989]

a better view of what im talking about

[Morph]

Looks like you could take it to a muffler shop ask them to cut the hot pipe after the bov and flip it 180 degrees and reweld it together, and you could continue to use the intake pictured.

[DrifterProdigy85]

Make your intake pipe, then make your hotpipe to fit around the intake, and then have a new BOV flange welded on wherever you want it.

[Asia989]

after trial and error this morning ive found that the powersteering bolt is the culprit, now i gotta drill the ps fitting bigger to make it tuck behind the pump

[rc1honda]

Try Pipingpro.com. Thats where a bought my metal turbo intake. Fit perfect and clears everything nicely. I don't knwo what turbo you have, But the on for the 2871 3in fit awesome with good quality. Here is the one for the t25,http://pipingpro.com/shop/sr20....html

[Asia989]

Try Pipingpro.com. Thats where a bought my metal turbo intake. Fit perfect and clears everything nicely. I don't knwo what turbo you have, But the on for the 2871 3in fit awesome with good quality. Here is the one for the t25,http://pipingpro.com/shop/sr20....html

ive been looking at them rc i have a s14 turbo, but my biggest issue is the intercooler kit im running which is Hdi