Turbo Choices....Im trying to choose

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
nismodave
Posts: 1423
Joined: Fri Nov 22, 2002 1:18 pm

Post

Im going to replace my t-28 ball bearing turbo with a better one.

Im looking for 400 hp, rear wheel.

I have every bolt on mod imagineable IC, ECU, Injectors.....etc.

Im thinking of 3 possibilitys.

#1- Enjuku kit

#2-CTC kit

#3- HKS GT-RS

If you have any experience with the above or info other than what company will tell me, Id like to hear it.

Thanks

Dave


turboex
Posts: 274
Joined: Mon Sep 23, 2002 3:58 pm
Contact:

Post

I run a precision sc61 with custom manifold, tial 38m wastegate. its the ****. total cost about $$1450

nismodave
Posts: 1423
Joined: Fri Nov 22, 2002 1:18 pm

Post

Is that on your civic????

Seriously what are the details on your setup?

Who did your mani, what eng managment, injectors, boost????

Etc....

Pm me if you like.

solid
Posts: 368
Joined: Tue Jul 23, 2002 8:14 pm

Post

hey if you sell your t28 i would buy it from you. email me at [email protected]

turboex
Posts: 274
Joined: Mon Sep 23, 2002 3:58 pm
Contact:

Post

no this is on m sr20det, custom mani. still working on fuel setup

Zaxx84
Posts: 170
Joined: Thu Nov 28, 2002 10:36 am

Post

I had the HKS GT2540R, but I sold it, I'm going to be goin with the GT-RS after I save up a little cash for the quicker spool up and crazy power capabilities.

User avatar
Movingviolation240
Posts: 1681
Joined: Thu Apr 25, 2002 2:26 pm
Car: '95 Nissan 240SX 400hp SR20DET -SOLD
'93 Lexus SC300 w/ SP66 turbo kit

Post

I'm really happy with my GT25R, throw that on with the OBX manifold and Greddy O2 housing and you can make 400rwhp.

Paul

nismodave
Posts: 1423
Joined: Fri Nov 22, 2002 1:18 pm

Post

Movingviolation240 wrote:I'm really happy with my GT25R, throw that on with the OBX manifold and Greddy O2 housing and you can make 400rwhp.

Paul


I did not know it was rated for that high.

Have you dynoed it yet?

What managment do you use?

Thanks

Dave

User avatar
Movingviolation240
Posts: 1681
Joined: Thu Apr 25, 2002 2:26 pm
Car: '95 Nissan 240SX 400hp SR20DET -SOLD
'93 Lexus SC300 w/ SP66 turbo kit

Post

just a tunned ROM, without tunning or cams at 17psi it did 328, throw in some tunning and cams and your at about 370rwhp (368 on Jay's 240 without the Greddy intake manifold or O2 housing). I have the O2 and football, so I should be able to make 400rwhp after I get my cams tomorrow and take the car to Tampa for some tunning.

Zaxx84
Posts: 170
Joined: Thu Nov 28, 2002 10:36 am

Post

Movingviolation240 wrote:just a tunned ROM, without tunning or cams at 17psi it did 328, throw in some tunning and cams and your at about 370rwhp (368 on Jay's 240 without the Greddy intake manifold or O2 housing). I have the O2 and football, so I should be able to make 400rwhp after I get my cams tomorrow and take the car to Tampa for some tunning.
...DROOL...

Phax
Posts: 1624
Joined: Tue Nov 12, 2002 6:24 pm
Car: Control dynamics

Post

Movingviolation240 wrote:just a tunned ROM, without tunning or cams at 17psi it did 328, throw in some tunning and cams and your at about 370rwhp (368 on Jay's 240 without the Greddy intake manifold or O2 housing). I have the O2 and football, so I should be able to make 400rwhp after I get my cams tomorrow and take the car to Tampa for some tunning.


:ylsuper :pimp


Return to “SR20DET Forum (rear-drive)”