Tuned ECU or BikiRom??

[jack-pot]

Im looking to go KA-T on a SOHC and i was wondering what would be the best? I searched around the forum but nothing really answered my Question. I was thinking about getting my ECU tuned by Enthalpy but then when i looked on there site they dont offer it for the SOHC. and it seems like everyone is says the same thing for JWT, they seem to go lean... So i was wondering if it is possible to run a DOHC ecu for mine, or if theres anything that can be changed during the tune for it to work? Or if the BikiRom would work for the SOHC? I was looking at the installation guide for installing the board and i couldnt find what they were talking about? My ECU looked way different from the pics?? My ECU is from a 89 240 and the # is A11-B15 G02 - Does anyone know if the BikiRom can be put in this ECU? thanks for your time!

[wild_maxx]

JWT does make programs for the SOHC. i have the 50 lb. program with z32 maf and 550cc injectors. It was pretty rich so i used the SAFCII to tune it down. I am not sure on Enthalpy tunes for the SOHC but have heard that their tunes are less conservative that JWT. I have not done any research on BIKI yet so your out of luck on that.

What are your power goals? You can use a SAFCII to tune with up to about 10-14 psi, after that you wan't something to control timing.

[Chezedik]

You cannot run the DOHC ecu on SOHC, the connectors are not the same. I do not know about the bikirom though. You may thinkabout going to the NA forum to answer your bikirom Qs, also MegaSquirt and Spark is out, and a good affordable option as well.