trick for camber???

[maka]

just wondering if there is a trick for the rear camber, like the hondas (previous honda ownder....swapped to s14 )

[pregmantis]

I think I saw somethin on 240sx.org. somethn with elongating some holes. that was a sorry explanation

[InsanityInc]

Wow. Just wow.

This is the forum for the KA24DE engine. Unless you want to camber your pistons or something, you've posted in the wrong place.

I recommend going back to the honda. You will never be a drifting champion, or JDM TYTE olol 11!!1, and will never have an SR20DET.

Step away from the bandwagon.

[420sxse]

Also the KA24E, don't forget the SOHC peeps. It is odd that someone would decide to click on the word "Engines" when they had a suspension question. At least he didn't click on one of the SR forums...that should say something at least. Enjoy your ride, dude.

[maka]

Wow. Just wow.

This is the forum for the KA24DE engine. Unless you want to camber your pistons or something, you've posted in the wrong place.

I recommend going back to the honda. You will never be a drifting champion, or JDM TYTE olol 11!!1, and will never have an SR20DET.

Step away from the bandwagon.

look at the icon "newbie"... look at the posts " 6 " , thats right, i am new at this post which i hope to learn a lot from other members unlike yourself...

"1172".. wow, that is a lot of posts, but whoopity... ****en doo!!!. do you want a cookie for your sorry *** remarks? its probably 1172 posts of flaming or negative feedback which people dont learn anything. i joined the forum to learn, and with that many posts, i hope to learn something from you. so if you dont intend to teach me anything, or confront me face to face and settle this like men, then your just a little *****, and i suggest you "SHUT THE **** UP"...

everyone else, thanks for the info..

[pregmantis]

pdm sells some whitelline offset bushings for the rear as well as a full set of poly suspension bushings.

[JNM240]

Your best bet would be fully adjustable rear upper control arms. SPL or JIC or Tanabe or, hell theres a bunch of them out there. Check out Phase2motorsports.com or splparts.com or jspec.com for some. They allow you to adjust your rear camber a WHOLE lot.

[TrueSlide]

Your best bet would be fully adjustable rear upper control arms. SPL or JIC or Tanabe or, hell theres a bunch of them out there. Check out Phase2motorsports.com or splparts.com or jspec.com for some. They allow you to adjust your rear camber a WHOLE lot.

JIC and Tanabe will get the JDM factor bling, but f that they are way overpriced. I bought some TCSportlines and they are pretty sweet.

[InsanityInc]

look at the icon "newbie"... look at the posts " 6 " , thats right, i am new at this post which i hope to learn a lot from other members unlike yourself...

"1172".. wow, that is a lot of posts, but whoopity... ****en doo!!!. do you want a cookie for your sorry *** remarks? its probably 1172 posts of flaming or negative feedback which people dont learn anything. i joined the forum to learn, and with that many posts, i hope to learn something from you. so if you dont intend to teach me anything, or confront me face to face and settle this like men, then your just a little *****, and i suggest you "SHUT THE **** UP"...

What, did your mommy not hug you enough when you were little?

Post counts mean diddly. Notice how I never brought them up?

You said you came from the honda community, and you asked for the "trick for camber" in the engine forum. This is a bad sign. This just screams to me "Hey everyone, I heard about drifting so I ditched my riced-out honda civic and bought a 240sx".

You also seem to be on the verge of acting like the classic "internet tough guy", which really doesn't improve my opinion of you.