Transmition Swap s14 98

ONLY for ADVANCED technical discussion about the 240sx!
hachibroku
Posts: 193
Joined: Sat Oct 30, 2004 1:10 pm
Car: 98 240sx s14 MO Betta

Post

I need to know what i need to get for a trans swap. Auto to a Manual. ive got a 98 240. Please help nissan dealership wont even help me. Thanks


User avatar
okis14
Posts: 90
Joined: Wed Jun 30, 2004 12:35 pm
Contact:

Post

You should search at least a little for the information.

I just did this and got most of my information from http://www.ka24development.com....htmlhttp://www.240sx.org/links/ins...p.htm

There are a few things to note. Make sure to get the right driveshaft. Either ABS or non ABS.Make sure your transmission comes with all the sensors, mount and crossmember or you'll have to get them yourself. Since your ODBII you'll have another sensor at the top of the transmission. You don't "need" it but you may throw a code.

If changing your ECU any 95+ will work but you'll want a 5 speed one. Use this chart to make sure it is 5 speed (http://jimwolftechnology.com/wolfpdf/ECU-ID.PDF). If you use a 95-96 you will have to do a little rewiring.http://jimwolftechnology.com/w...D.PDF

You don't "have" to do the wiring but if you don't most likely you'll throw a code. I'm throwing code 77, Rear 02 Sensor. I haven't rewired the ECU or changed my sensor yet.

hachibroku
Posts: 193
Joined: Sat Oct 30, 2004 1:10 pm
Car: 98 240sx s14 MO Betta

Post

Hey man thanks a lot. that information will help me a lot. Probably another week and i'll get all the stuff.


Return to “240SX Technical Forum”