Transmission Question

[stacy]

Hey guys quick question I have my sr20 on the engine stand and Im working out my garage. I just got my fidanza flywheel and Im wondering whats the easiest way to take off the old flywheel, and is their a certain order to put bolt the new flywheel on??

[Spectro]

To be honest, the esiest way is with an inpact gun, i just see my mech doing it so easy, otherwise get a friend and have him put a fat flat head screw driver in between the flywheel and the black and with a breaker bar try to unbolted. I have done it a few times, take longer, but it usually works.

[nismojr1992]

i agree with spectro and impact makes it alot easier but so does have ing a good breaker bar and a friend helping yoi out that how we do ours.

[stacy]

alright ill try to c if I can get an impact gun but if not imma have to use my breaker bar thanks for the help guys

[574-240sx]

Use an impact or the breaker bar would work just fine. When you put the new one on I just tighten it like I'm putting on lug nuts and torque them to spec using red locktite.

[LayNLow240]

If you have some chain laying around, put a bolt in one of the pressure plate holes with the chain on it, then bolt the other end of the chain to the eng block and torque away. Just make sure you have long enough threads in the block and flywheel before you really torque them on.