transmission/Clutch problems, sourcing parts?

[Porschephile]

Well, I got a r33 gts-t transmission. I still need to get a clutch, and will probably go with a ACT, Spec or RPS. The question is, I'm missing all the flywheel, pressure plate and transmission bellhousing bolts. Does anyone know for a fact whether it's possible to use any z32 or other US market bolts in place of these. I'm a little paranoid about just using some of the random bolts in my Nissan parts buckets since the clutch/transmission are expensive items.

Also, can the slave cylinder be sourced from any US car, such as the Z32? I searched and didn't really see anyone mention anything about that. Someone mentioned they used their s13 slave.

[74260zt]

Well, I got a r33 gts-t transmission. I still need to get a clutch, and will probably go with a ACT, Spec or RPS.

Can I ask?? where did you aquire the trans, and how much did they sting you for it??

thanksjoel

[PROJECTRB240SX]

BOLTS ARE SIMILAR TO THE Z32 SO YOU SHOULD BE FINE

I'M USING MY S13 SLAVE, AS LONG AS ITS A PUSH TYPE SLAVE YOU SHOULD BE FINE.

[Porschephile]

I just got very lucky and won the gtst transmission of Ebay for $800.

[93RPS13]

you can get a flywheel at http://www.tophatperformance.com $400+ shipping , i think that all the RB flywheels are interchangable, can anyone conform that? Thanks

[Joe]

yes they are interchangable for the most part.

and yes a stock S chassis slave cylinder will work.

[Andrew85cm]

Anyone have an extra stock flywheel laying around? LOL I need one for an rb20det

[eyustfu]

i will have a stock one soon laying around, email me at [email protected]