Post by
zozoka1212 »
https://forums.nicoclub.com/zozoka1212-u59702.html
Wed Mar 18, 2009 2:58 am
Rich,
Also there is a cool feauture in the Focus. In the diagnostic mode it will show sooooo many different things include oil temp, coolant temp, trouble codes, battery voltage, fuel volume etc, etc,
Better than the G LOL.
Here is how to get there:
Hold down your odometer reset button, turn your key and start the car, continue holding the button for a few seconds, and you'll get into "test mode", where you can scroll through a bunch of different readings by pressing the button.
Here is what you can see by just pressing the buttom after you entered in test mode.
1 Gauge Sweep All gauges carry-out sweep2 LCD Test Makes all the LCDs light up3 Bulb Test Lights all functioning cluster bulbs4 Rom Level Displays the instrument cluster ROM revision level5 NVM Level Displays the instrument clister NVM revision level6 DTC Diagnostic trouble codes7 Road speed MPH8 Road Speed Kmph9 RPMs10 Fuel Volume11 Engine cooland temperature12 battery voltage13 ABS Fail Displays ABS RAW input (H=over-charging or battery L=Ground)14 Electronic brake distrubution failure ^15 Illumination H=on L=off16 Crank sense H=ignition L=ground or over-charging
zozo