TPS problem

[iLLusive240^]

So i got the car running last night and had some funky problems so i checked codes.. code 43 came on unplugged it and plugged it back in started the car let it run for a few seconds seemed to be better (maybe)? checked codes and code 55 came up... this means no codes. Tonight i wired my SAFC II in thinking i was done with that problem, well... when i saw the voltage in the sensor check it gave me 4.60 volts. at 0% throttle and at 100% it gave me 4.75 volts... anyone have any ideas? my guess is its either the ground side of the plug wiring or the sensor itself. I just bought a harness from wiring specialties and that seems to be the only changed thing in this instance since last year when it read fine anyone have any ideas?

[Hoffman5982]

Make sure you are testing the right wire. Should be the middle wire on the TPS plug and should be at .45 volts completely closed(remove throttle cable from pulley)