tore my motor down,got a hole,got a qeustion...pics

[corey240]

ok so i tore my motor down, long story short theres a hole in my block and its small,like less then anickel but like a funny shaped dime, my question is could i get this hole welded shut and smothed out and it be safe? heres a pic. the hole story with more pics is in the 240/silvia section.

[ILikeMy240sx]

Id be more worried about how the hole got there in the first place....

Is that near the oil galley? I wouldnt definitely leave the hole like that tho.

[vutony]

wth, i would just get anouther block to be safe, i rather not weld it, install everything back together and it craps on u again

[twofourzeroSX]

where is that hole? i thought there were a few holes that are supposed to be in the block for oil to come down from the head or w/e...i noticed a few holes i questioned when i did my rebuild but i found out that they all were OEM and matched up with the head.

[hpmachine]

yeah could that be an oil squirter hole?

[corey240]

all i have to say is you 2 a retarded because if you really knew what an oil squerter hole looked like and the spot they are at you would 100% know thats not oem, did you not notice how crappy that is?dead thread

[hpmachine]

ok well maybe you're a bit 'retarded' yourself cuz you should know that if your block has HOLE in it, it's most likely not worth keeping. jeez

[Henry G]

all i have to say is you 2 a retarded because if you really knew what an oil squerter hole looked like and the spot they are at you would 100% know thats not oem, did you not notice how crappy that is?dead thread

WTF dude?!

The picture is horrible. I have no clue where in/on/above/under the engine this was taken? For all I know it's not even a pic of a motor. They are just trying to help so back the **** off if you want someone to give you a hand. Before you attempt to weld your block, trying finding the macro option on whatever camera you used. If it was a cellphone never use it again to explain a problem that needs a good quality pic to explain.

btw your sig makes no sence... how many of those street racing deaths are innocent people that weren't racing? You can't compare falling coconuts with street racing.

[myees13]

that hole is not cool.

JB Weld it shut....

[corey240]

mods lock this

[wynnEZ]

You can weld the block its not a big deal. Just take it to your local machine shop and have them look it over.

[corey240]

ok theres also a piece of the inside of the cylder missing not a chunk, but a piece of the wall. could it be sleeved?

[Markdawg2006]

new block