Topless_92's KA Vert Build

Post by **ShallowPockets** » Mon Aug 13, 2007 5:36 pm

370cc topfeed low impedence CA18 injectors were a freebie from one of the guys.

and we stripped the motor down. the rod bearing on #2 is non-existant, so we may be shopping for good crank and maybe a set of rods. we'll check the journal sizes and all and go from there.

Post by **Topless_92** » Tue Aug 14, 2007 12:24 pm

Just got a package from AMS with my Calico Coated rod bearings and main bearings. Also a copper exhaust gasket...

Post by **Topless_92** » Wed Aug 22, 2007 5:18 am

Haven't updated in awhile because not too much has happened...The Block should be sent out sometime in the next few days if everything goes as planned. The block is gonna go through Honing and Decking and they'll clean up the crank. Also our gaskets, oil pump parts, piston rings and seals came in from Nissan.

JGS mounts came in too because the ones on my car were done....these are beast

Post by **ShallowPockets** » Tue Sep 18, 2007 4:16 pm

crank scraper came in, and block got back from the machine shop, picking up the crank tomorow and starting on the headwork.

YouTube · Post by **DeXteR** » Wed Sep 19, 2007 2:41 am

great work. keep us posted!

Post by **ShallowPockets** » Wed Sep 19, 2007 6:39 pm

forgot to post these up.

5' of fuel rail stock. dropping it off to be machined thursday or friday.

and some end fittings.

Post by **DirftKing102** » Wed Sep 19, 2007 8:15 pm

are you and shallow both working on your vert together? I am guessing. Nice work Hopefully everything goes as planned. Keep working on it Glad you have the money to do it

Post by **Topless_92** » Thu Sep 20, 2007 1:57 am

ShallowPockets is my brother and hes doing alot of the work on my car

Post by **DirftKing102** » Thu Sep 20, 2007 4:29 am

sweet! Good luck with the project!

Post by **94_240sx** » Thu Sep 20, 2007 5:27 am

Dang!! No joke. Looks like a great project. I wish I could do the same thing to my car...

Post by **Juanit0** » Thu Sep 20, 2007 10:37 am

GOOD STUFF!

Post by **ShallowPockets** » Thu Sep 20, 2007 5:26 pm

block is sitting at the shop. needs to be cleaned up(exterior-wise), and we're going to drop off the head for checking journal clearances with the BC cams, and get x-rayed to check for blockages. and when we drop that off we'll pick up the crank(which had to be remachined on one journal to give a good clearance) and start to assemble the motor. that all should happen monday after I unload the valvesprings.

oh, and mike got some VIP in a box today...

17x8 +5 and 17x9 +11 SSR's from rbmotoring.

Post by **DirftKing102** » Thu Sep 20, 2007 5:36 pm

nice rims. Are they going on his 240 vert?

Post by **Topless_92** » Fri Sep 21, 2007 1:54 am

They sure are

Topless_92's KA Vert Build

Re: Update (pinky121388)

Re: Update (ShallowPockets)

Re: Update (Topless_92)

Re: (ShallowPockets)

Re: Topless_92's KA Vert Build (Topless_92)

Re: Topless_92's KA Vert Build (DirftKing102)

Re: Topless_92's KA Vert Build (Topless_92)

Re: Topless_92's KA Vert Build

Re: (ShallowPockets)

Re: (DirftKing102)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums