??????

Information on the naturally-aspirated KA24E and KA24DE engines.
Post Reply
User avatar
Rekless KA
Posts: 158
Joined: Mon Jun 12, 2006 2:19 pm
Car: 96 240sx

Post

ok, so the other day i put my 91 cams in, i have a 96, and i also took off my intake mani upper and lower and cleaned. i tryed starting my car and it wont start, just turn over, then once it made a pop noise and smelt like fireworks! bend valves? off timing? what do u think?

Top
User avatar
S3t0_S13
Posts: 4526
Joined: Tue Dec 13, 2005 2:24 pm
Car: Of Nothing But FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
Contact:
Contact S3t0_S13

Post

whyd u swap out the cams in the 1st place?
Top
User avatar
S13DrIfTmEkAnIcS
Posts: 61
Joined: Wed Jan 17, 2007 5:50 pm
Car: 89 240sx

Post

either u switched them, intake on exhaust and exhast on intake=bad head......or the timing is off, so try setting the timing again
Top
User avatar
Rekless KA
Posts: 158
Joined: Mon Jun 12, 2006 2:19 pm
Car: 96 240sx

Post

ok, found out it was the timing, the marks are worn off so i have to buy a new 1 tomorrow for my car to start. hopefully
Top
Post Reply

Return to “KA24E / KA24DE Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy