top feed fuel injectors???

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
DawgMode
Posts: 646
Joined: Wed Aug 04, 2004 3:22 pm
Car: 180sx
Contact:

Post

I am soon gonna convert to a top feed fuel rail so i dont have to spend money out the arse for side feed 555cc injectors. so what top feed 555cc injectors would you recommend.

also wat ohm injectors should i be looking at???


DawgMode
Posts: 646
Joined: Wed Aug 04, 2004 3:22 pm
Car: 180sx
Contact:

Post

anyone

red_sir
Posts: 64
Joined: Mon May 10, 2004 4:55 pm

Post

I bought my top feed Delphi injectors from. http://www.racetronix.com/

You'll need high impedance injectors if you don't want to bother with wiring in resistors.

DawgMode
Posts: 646
Joined: Wed Aug 04, 2004 3:22 pm
Car: 180sx
Contact:

Post

What ohm should i be looking for???

is 12ohms alright or i need to go higher

red_sir
Posts: 64
Joined: Mon May 10, 2004 4:55 pm

Post

12 ohms will be ok.

DawgMode
Posts: 646
Joined: Wed Aug 04, 2004 3:22 pm
Car: 180sx
Contact:

Post

thanx for the info

DawgMode
Posts: 646
Joined: Wed Aug 04, 2004 3:22 pm
Car: 180sx
Contact:

Post


USsil80
Posts: 1949
Joined: Sun Sep 07, 2003 6:21 pm

Post

what is the stockl lag on the sr 370 injectors ... sorry to jack a thread...

User avatar
BigJuiceSr20
Posts: 97
Joined: Mon May 26, 2003 7:47 pm
Car: nissans, mazdas, soccer

Post

89-91 RX7 T2 injectors are top feed high impedance 550cc's.This is what I'm going to use and retrofit into a 1G Eclipse/Talon fuel rail and use on my SR.

User avatar
need2drift
Posts: 409
Joined: Wed Dec 24, 2003 1:39 pm
Car: 89 s13 sr20det powered coupe

Post

yea i have been readin up on using the fc 550cc injectors but i didnt know about the eclipse fuel rail is it almost a direct fit or what??? keep me updated on how it goes man im very interested....

ItzGenX
Posts: 1204
Joined: Wed Sep 04, 2002 7:46 pm
Car: Smoke Purple 95' S14.5. Powered by the "Iron Man".
Location: Gulfport, MS
Contact:

Post

I believe the MSD 50lb injectors also come in high impendance flavor. After that point, they all go to low impendance.


Return to “SR20DET Forum (rear-drive)”