Took the RB25 to the track after clutch install.

[Imissmyturbo]

Last time I went to the track I had my stock clutch in and couldn't launch the car very hard. I just put a 6 puck in it last week and wanted to see what I could do.It was a nice cool day out around 60 degrees.Only got two runs in.1st2.3 60 ft13.4 @ 111

2nd2.2 60 ft13.03 @ 112.85.

I really wanted to dig into the 12's and I am sure with another run or two I may have.

[JustinStrife]

That's some nice times. You running an LSD?

[Yellow4g63]

Last time I went to the track I had my stock clutch in and couldn't launch the car very hard. I just put a 6 puck in it last week and wanted to see what I could do.It was a nice cool day out around 60 degrees.Only got two runs in.1st2.3 60 ft13.4 @ 111

2nd2.2 60 ft13.03 @ 112.85.

I really wanted to dig into the 12's and I am sure with another run or two I may have.

That MPH you should be in the 12's Got some street slicks?

[Imissmyturbo]

I am running on street tires with an R32 LSD that has 4:11 gears.I really want the car to run 12's on street tires so I need to work on my launching and make alittle more power so I can run 12's with ease.

[fly240]

Imissmyturbo, Are you running on stock turbo?. That is a very respect run.

[Imissmyturbo]

Nope. I am running a 56 trim T3/T4 turbo which is rated at 65lbs/min. I don't see full boost till 4000 RPM's. I am running 12 psi. Basically I am maxing out the stock injectors so I should be making a little over 300 WHP.

[fly240]

who customize your turbo? I here alot about t3/t4 turbo in rb25, but I'm wondering who did the work or do you have to customize your own.