Took her out on the road again tonight

[Florida240sx]

Engine bay. Painted the bay black instead of it being white with black grease marks.....Valve cover looks better in person, called wrinkle finishcustom heat shield, with PA in the corner

[Florida240sx]

Easy shifting and 9-10 A/F ratio http://media.putfile.com/KAT92Floyds13 vs Ihttp://media.putfile.com/katvska

[KATwo40]

Glad to hear you got it going again! Good job on the install and whatnot. If you ever take a cruise up to east TN, hit me up. I'll show you some curvies you'd never imagine.

How much boost you running now?

[nismofly]

just a whee bit of wheel spin on the first vid?

[Florida240sx]

Happens everytime.Think it starts around 5800.If I cut the wheel any whatsoever it just smokes them. Going to try to get a burnout video tomrrow

[brunswick240]

AWESOME JOB JUSTIN! Congrats on the progress, you absolutely killed that 240 in the 2nd vid, haha yaa that wheel spin has gotta be nuts. Cant wait to see some pics and some more vids! GL and have fun... now start gettin on that VG install hahaha nice job, looks good.

[S14tat]

looks good, how many psi are you running?

[rsmithdrift]

God!! That is how much power I want. That is a perfect amount. How much did all the turbo and other upgrades cost you so far?? Lol, what like 6-8 grand??

I can't believe you have a stock fan still. An elect fan is easy if you have the stock A/C fan still in there. Just wire it to your fuel pump fuse and viola. $0.59 and you've just gained 7-10whp. It actually makes the car run cooler than with the stock clutch fan. I have an N/A though, so IDK if that turbo will heat things up more or not though................Just a thought.

Ever dynoed it?? I'm curious.

[GEO]

^^ :

[naed240sx]

Damn 100 mph in about 15 seconds. Not bad.

[Florida240sx]

Can't wait till I get the consult to check my timing. Then I can fine tune an get the extra power. Gauge says 8psi, but it's a 10psi spring.The spring could of lsot some of it's springyiness* but Where I got it tapped for it, it could be leaking a little.I got a place in town that has 100 octane Might go to the track this weekend or middle of next week.I was shifting early too....Only problem is a slight leak where I got my oil pressure gauge.Just need to tighten it up. And have a battery issue.Something isn't tight or battery is bad.

[Florida240sx]

Current cost of my turbo setup:IAP kit $3000Safc $260LC-1/xd-1 wideband $350oil/boost gauge $100RPS turbo clutch $450

So just over $4100I have $5000 in parts. Just not all installed yet. And got abotu $500 in misc things like redline gear oil, engine oil, filters, new hoses, etc.

[emperor_lunchbox]

what track are you going to and what day? I would love to see your setup.

[Florida240sx]

Bithalo...closer to you than me. Probably going to be on fri/Saturday night. 386-747-9982 Give me a call so I can save your number. I'll let oyu know when I"m going. You going to the meet on april 1st?

[nb07bcar]

Do you have posi? and what type of tires? I just wanted to know because I'm running 10-12 psi and I never smoke the tires in the upper rpm's

[nismofly]

what kind of turbo are you running that on

hes doing it on a t3/t4, if you have a t3 or t25 hes making a lot more power than you at the same pressure

[pancho y onions]

Looks really nice man.

[Valley]

Gauge says 8psi, but it's a 10psi spring.The spring could of lsot some of it's springyiness*

does the gauge get pressure from the manifold or right after the turbo? if manifold then 2psi pressure drop sounds about right for most turbo setups

[KATwo40]

This is correct. My spring is 8psi and I was seeing 6-7psi without the MBC.

[FloydS13]

That other car in the vid is me and im pissed cuz I don't have boost yet but its comin soon, so until then: Florida you suck

[Florida240sx]

What was that????You don't want help on your car anymore???

[FloydS13]

thats just f**ked up! who's bin helping you , ya lil bastard, but still Ill be faster ......................................someday