Tomorrows Project

Rev_D21: Posts: 5946; Joined: Sun Jan 12, 2003 9:49 pm; Car: 1986.5 D21 LB HD 2WD V6 5Speed
1991 D21 Reg 2WD Auto
1995 D21 Reg 2WD 5Spd
1996 D21 Reg 4WD 5Spd
2012 Versa 1.6S 5-Speed; Location: Somwhere in Western NY; Contact:
Contact Rev_D21

Website

Quote

Post by Rev_D21 » Sat Jan 17, 2009 6:19 pm

Install Extang Tuff Tonneau III on my truck. I have the frame assembled in my dining room right now. I will have pics to post after the install. Extang makes a nice product from what I have seen so far.

Top

mrecoolgar: Posts: 362; Joined: Wed May 28, 2008 5:34 pm; Car: 1990 Hardbody Reg Cab 2WD 2.4 5SP

Re: Tomorrows Project (Reverend D)

Quote

Post by mrecoolgar » Fri Jan 23, 2009 4:09 pm

Looking forward to seeing.

Top

Rev_D21: Posts: 5946; Joined: Sun Jan 12, 2003 9:49 pm; Car: 1986.5 D21 LB HD 2WD V6 5Speed
1991 D21 Reg 2WD Auto
1995 D21 Reg 2WD 5Spd
1996 D21 Reg 4WD 5Spd
2012 Versa 1.6S 5-Speed; Location: Somwhere in Western NY; Contact:
Contact Rev_D21

Website

Quote

Post by Rev_D21 » Fri Jan 23, 2009 4:12 pm

Too cold out to get it to snap on all the way. I gave up so all I have done is install the frame and bows. Come on warm weather!!!

Top

steveOd21: Posts: 23; Joined: Tue Nov 25, 2008 10:02 am; Car: 94 nissan D21 2.4 5sp base

Re: (Reverend D)

Quote

Post by steveOd21 » Mon Jan 26, 2009 6:52 am

try putt'n it in the oven at 100 degrees for and hour????

Top

Rev_D21: Posts: 5946; Joined: Sun Jan 12, 2003 9:49 pm; Car: 1986.5 D21 LB HD 2WD V6 5Speed
1991 D21 Reg 2WD Auto
1995 D21 Reg 2WD 5Spd
1996 D21 Reg 4WD 5Spd
2012 Versa 1.6S 5-Speed; Location: Somwhere in Western NY; Contact:
Contact Rev_D21

Website

Quote

Post by Rev_D21 » Mon Jan 26, 2009 10:05 am

That could work except I'd have to take the frame apart to get the front of the cover off. It's held in place by the end caps. I am sunk waiting for warmer weather.

Top