Tomei intake cam gear 152009

[OutToWinPAHC]

Has anyone ordered one of these? Part number is 152009. From the stock photos it looks to be the same as the exhaust side but I am scratching my head like hmm thats not gonna bolt to my cam. Any thoughts?

[Darius]

It'll bolt on, but you have to delete the VTC on the intake cam.

[Carl H]

greddy USED to make a cam gear that was VTC compatible.

[Darius]

I used to have that thing bookmarked on ebay. I think installation involved separating the geared part of the cam gear from the oil pressure part of the cam gear and then replacing the geared portion with the Greddy. The Greddy cam gear looks like a donut instead of a wagon wheel.

[Darius]

Bam! There it is.

http://www.frsport.com/Greddy-13523306- ... nAodyAgApw

[OutToWinPAHC]

They are out of stock, damn

So I just looked at the intake cam (stock) on both of my heads. Both the same, both only have 3 holes, 1 large center bolt, dowel pin and what looks to be an unused hole possible oil hole for the VTC gear? So I just dont understand why in photos of the tomei and other brands intake gear shows 6 holes aka the same as the exhaust set up. Unless 3 holes dont get used. Other photos of RB25's show the aftermarket intake came gears using all 4 outer bolt holes like the exhaust cam. Just confused

[OutToWinPAHC]

called Raw Broakerage..... those only fit the 20/26. Kelford cams come with 4 bolt pattern but with the tomei cams you have to reuse the stock intake came single bolt gear. They are gonna find out if the intake/exhaust cams from tomei are the same (poncams) if they are the same then running 2 exhaust cams would work but they are not sure if the lobe position and base circles are the same.

[Carl H]

if you want to kill off vtc then just get rb20 cams...problem solved.
unplug the vtc solenoid and you're done.