Timing Chain question

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
Rskee180sx
Posts: 18
Joined: Fri May 23, 2003 8:46 pm

Post

i have a 91dohc im in the middle of changing the chain but i cant get the timing cover offf its wont come out from the bottom part of the timing cover. i didnt drop the oil pan yet i was trying to avoid it ... should i drop the pan any advice would be welcome:help :help


Onizuka
Posts: 8450
Joined: Wed Nov 06, 2002 5:24 pm
Car: 91 Nissan S13 coupe SR20DET
89 Nissan S14 hatch SR20DE

Post

well, im pretty sure you have to remove the crank pully and front plate as well (and you have to take off the oil pan to take off the front plate). Hopefully someone else replies that can verify this for us.

User avatar
Get240DiZzY
Posts: 993
Joined: Tue Aug 27, 2002 12:05 pm
Car: Rallying. My 240. Not at the same time though.
Contact:

Post

I can't help, except for recomending(sp?) the http://www.240sx.org faq's. I'm not sure it's in there, but take a look anyway.

User avatar
89240sx
Posts: 1387
Joined: Wed May 14, 2003 10:28 am
Contact:

Post

Ask TrueSlide ... he just rebuilt his sohc he may know if the two engines are very close to the same. He also did his timing chain with a kit.

Rskee180sx
Posts: 18
Joined: Fri May 23, 2003 8:46 pm

Post

dohc is alittle different to a sohc im just having trouble takin the bottom part of the timing cover off

lbrowne
Posts: 1520
Joined: Sat Dec 14, 2002 9:12 am
Contact:

Post

I'm almost certain you have to drop the oil pan on the dohc, i did the timing chain kit on my sohc and never had to.

but, i think you can get away with just lowering the front part of it, and be careful when doing so.

Rskee180sx
Posts: 18
Joined: Fri May 23, 2003 8:46 pm

Post

so i should drop then pan then damm i was trying to avoid

lbrowne
Posts: 1520
Joined: Sat Dec 14, 2002 9:12 am
Contact:

Post

as far as I know on the dohc...theres no way around it :(

Rskee180sx
Posts: 18
Joined: Fri May 23, 2003 8:46 pm

Post

i knew i should have droped that pan instead of wasting so much time i could have been done by now


Return to “240sx General Discussion”