tial 38 mm spring?

[NX95240]

were could i get a bigger spring for my TIAL 38mm w/g? i was going to dyno by the weekend but need to get a bigger spring. high boost i want around 24 psi or so.i have call few place's and all they just have is the smaller one's ..thanks if you can help me.

[bruinbear714]

I believe you can use a large spring and a small spring together added up to give you the large amount of boost you want.

[skatanic28]

you could always use an mbc to get you there. bruinbear is right though, ill try to find the link where it says whats what.

edit: heres a site that sells the combos together. its 50 bucks though, ouch.http://www.importperformance.com/store/ ... inghighest one is 23 psi

[Structure240sx]

a joe p MBC is $45 shipped, and gives you the adjustment you need

[MaxType 240]

I just purchased a 10lb spring for mine, my AVC-R is running my 4.35 at 80% duty cycle

I've shopped with http://www.lightningmotorsports.com/tialsport.htm many times, springs are $30.

Jesse

[NX95240]

max type 240- what is the max psi you can get with that one?thanks for the help .

[:: orion ::]

A decent boost controller can add plenty of boost to a 10psi spring...the ~4.35psi spring is just so soft that the exhaust pressure forces it open. Not so easy with the stiffer spring, so it's easier for the boost controller to "keep it up"...hehe.

I'll bet *any* boost controller can do at least 20psi on a 10psi spring...

- Brian

[WDRacing]

I ran 28psi on a 10lb spring with my TurboXS dual stage BC. Having the ability to run low boost is a must if you want longevity. Course, I guess I did keep it on high boost most of the time...I'm a wicked boost addict though.

[BadMojo]

Not to thread-jack, but to the original poster what kind of fuel management are you using @ 24psi?

[skatanic28]

Not to thread-jack, but to the original poster what kind of fuel management are you using @ 24psi?

specs are in his user info...seems like a real badass setup

[BadMojo]

specs are in his user info...seems like a real badass setup

Holy ****. That thing sounds like a monster. I'd have to sell a few internal organs to get a setup like that.

Nice ride!

Edit: Skatanic, you schooled me twice tonight on two different forums. You clever bastard!

[NX95240]

bad mojo i hope it is. hell i have enough money in this damn motor for sure. in my profile i list about ever thing i have. my damn w/g kept coming loose very bad though. i have the etd mani i like the set up on it but it is hell to get to the bolt when they are hot.LOL. i have a 5.8 psi spring right now. my 13.05 came in today going to put on this weekend to see what happen. then i will go dyno it by next weekend.( klattr1) has help me a hell of alot. thanks ryan.and you all has answer alot of my stuipd a** question thnaks.

[klattr1]

lol, no problem man.