Throttle cable holder on intake manifold compatabilities

[180fan]

Does anyone know if there is a compatable part for the usdm engines that'll fit the intake manifold that holds the throttle cable just before the throttle body? Or if anyone's got a spare of that part? It's got 2 holes and is held down by nuts on the intake manifold

[yellow_jacket]

I just redrilled the holes from my KA bracket. Worked great. I think it has about 6k miles on it now like that.

[180crafter]

Yellow, can you post a pic for us? Thanks.

[180fan]

Was that from a DE or E? I've heard that one of those two will work but it'd need to be bent in some angle or something like that.

[yellow_jacket]

DE I may have bent it but I really can't remember anymore. To be honest with you I probably won't have time to post pics until end of the week due to exams and work. I won't even be home.

[Movingviolation240]

Just get some scrap aluminimum, a vise, and a hammer, you can make one. Bend it, pound it into shape, drill it, and your set.

I had tried a few "rigged" ones (modified KA, SR, and CA brackets) but none really worked. I kept getting 'extra friction' in the throttle cable. The new one feels night and day better.

Granted though, I have the Greddy intake mani, so it's different.

Paul

[rudee023]

SR20DE is a direct replacement. Check '91 Sentra SE-R's.

[180fan]

Yep verified. The DE's bracket will work just gotta grind out the holes.

[9240sx]

rudee023- so the bracket off a 91 sentra se-r will work?with no mods,drilling or cutting?can you post a pic.if it works,one more thing will the cable lay over the valve cover?-thanks for the help-

[rudee023]

Yep it bolts right on with no modification. Got mine at the junk yard. Pretty sure any year SR20DE should work. Cable lays over the valve cover.

[9240sx]

thanks alot!