the rb20 clip i just got from venus came with an upgraded turbo

[crxcess]

I dont know what kind it is....

[JonPowell]

That is the same turbo that was on blk90S13's engine....no clue what it is.

Is the wastegate exit plugged on that one also?

[crxcess]

not that i know of, its got the actuator.

[Yellow4g63]

kinda looks like a mitsu turbo. 18G maybe 20g, that **** prob needs a rebuild lol.

[xjon]

Looks like it's got sludge. Any play with the shaft?

[BoostFab]

i think it's all just oil blow by, but do make sure the seals are still good

[crxcess]

im going to leave any turbo maintance to the owner of the engine, im just the installer there is only about maybe 30 thousands in and out play but no up and down play.

[DSMs_Suck]

i would agree with yellow... looks like an older mitsu td06 housing...

[Sil240]

Yeah we figured it was a Tdo5h5-18G dont know what trim though

[DSMs_Suck]

As far as I know the trims are what you just called it. Judging based on the wheel design it is an "G" wheel (sort of like trim for mitsu). The question is whether it is a 16g, 18g, or 20g.

If you measure the inducer on the comp. wheel.. I'd bet that you could find out which wheel it actually is.. There are charts for mitsubishi comp. wheels on the net....

Ok I was bored so I googled it:http://www.stealth316.com/2-turboguide.htm16g (small) comp. Inducer: 1.83016g (large) comp. Inducer: 1.89218g comp. Inducer: 1.99220g comp. Inducer: 2.070

MurrayDSMS forever