the rb 25 in a 1990 240 sx

[pomps4]

im tinkin about putting the rb 25 in the 240 i am wondering what i will need

[STR8E180]

its pretty simple over here in australia every one puts Rb20's RB25's RB26's into S13/S14/S15

if u use the skyline cross member the motor will bolt str8 in and the great thing about this is the cross meber bolts str8 on so once u have done that all u need to do is drop the motor in ur going to need a RB25 gearbox and Tail shaft as wellbut going to need to modify the tail shaft then get it balanced B4 u can fit itone of my most favorite conversion's is the RB30 bottom end with GTR headdunno if u guys have the RB30 over there but its a single cam 3L RB engine wat they do is remove the single cam head and bolt on a GTR cylinder head so u end up with a 3L twin cam RB26

oh and since im here heres a RB25 which we put into a 180SX which u guys call a 240sx
Modified by STR8E180 at 8:07 AM 6/17/2007

[CMG]

im tinkin about putting the rb 25 in the 240 i am wondering what i will need

*sigh*

[pomps4]

hey thanx for the info so the rb 25 gear box is better than therb 20. what about the mount kit they offer so that you dont have top replace the cross member

[480sx]

go here ---> zeroforum?id=135

read the stickys at the top of the forum
Modified by 480sx at 5:10 PM 6/24/2007