TENSION RODS
-
maxnix
- Posts: 22627
- Joined: Mon Jul 22, 2002 8:11 pm
- Car: 1995 Infiniti Q45
1995 Infiniti Q45t
2000 Infiniti Q45
Re: TENSION RODS (doc7592)
Most of us buy the bushings from http://www.infinitipartsusa.com and have them pressed in. About 2 hrs.
-
paranoidjack
- Posts: 1417
- Joined: Mon Oct 03, 2005 3:57 pm
- Car: 2012 Infiniti M56 S
2003 Infiniti M45
2001 Infiniti QX4
2000 Infiniti Q45
1998 Nissan Pathfinder
1996 Infiniti J30
Re: TENSION RODS (maxnix)
J
Only 4 bolts. Might need a breaker bar, and for a y33 you'll need a 22mm open end wrench to hold nutside, while the 19mm turns the bolt. You're stuck without the 22mm. Kind of hard to get up in there, so get the smallest 22mm you can find.
Just did it. Easy job (but you need a press-don't try the vice in your basement).maxnix wrote:Most of us buy the bushings from http://www.infinitipartsusa.com and have them pressed in. About 2 hrs.
Only 4 bolts. Might need a breaker bar, and for a y33 you'll need a 22mm open end wrench to hold nutside, while the 19mm turns the bolt. You're stuck without the 22mm. Kind of hard to get up in there, so get the smallest 22mm you can find.
Re: TENSION RODS (paranoidjack)
this is a little bit off from the topic but can't resist to ask about on putting an eibach lowering spring, are you better off with adjustables or you can use the oem ones with new rubber?
My apology
My apology