Tearing Down ka24de got a ?

[Top Speed Coupe]

OK -There is a rubber Line that goes from a little black box under the Thermostat housing and leads to a rails with 4 more shorter lines that goto the intake runners. Whats are they?

[JNM240]

PVC breather and valve.....? Thats what it sounds like to me. The breather is attached to the front cover, the hose goes from there to the PVC valve on the intake manifold.

[Top Speed Coupe]

That could be it, but doesn't the PCV Vavle connect to the intake right before the throttle body? These run in to each runner 1/4 before the head?. I'll check the 'black box' out further tommorow. Thanks

[Top Speed Coupe]

Also where did u get all that good Nismo stuff?

[cnichols]

Could it be for extra fuel return?

[cnichols]

I've got two KA24DE's sitting out of the car so I'll try and figure out what you're talking about later tonight when I get off work.

[JNM240]

The cam and cam gear and the T/C bushings came from Nissan Motorsports (either thru your local dealer or http://www.courtesynissan.com ), the Power Bar 2 from http://www.JSPEC.com and the engine/transmission mounts from http://www.phase2motorsports

Not listed is the JDM trunk lock conversion which i also got from JSPEC.