Taka Line Problem

Post by **BoroBoroS13** » Thu Dec 09, 2004 4:22 pm

I emailed taka the other day about getting some lines and I dont know if they want me to order the right kit or not . Check this out:

This is the email I sent them,"Hello, I need some custom lines for my Nissan 240SX. I have a CA18DET motor and will be putting on a S13 SR20DET T25. Thus im gonna need lines with fittings for the CA18DET on the motor side and SR20DET on the turbo side. I would like to get these in stand alone and black fittings. Let me know how much these would cost please, thank you."

This is what I got back from Harpreet Takhar at Taka,"Hello-Please order NISX3000TB-thanks-harp"

So I jump onto their web page to check out what kit this is and it comes up as "S13 T28 SR20DET Lines *Stand Alone Kit Black Fittings."

I dont know if its just me or not but I dont think thats the correct kit. Am I just triping out or did they make a mistake here??? Thanks

Post by **BoroBoroS13** » Thu Dec 09, 2004 4:26 pm

Also quick side question; Does my sig pix show up or is it a red box? Thanks

Post by **DriftinNC** » Thu Dec 09, 2004 5:10 pm

Im not sure about all the lines, but your sig pic is just a little box or for me it is, might be different for other people

Post by **WeldingHank** » Thu Dec 09, 2004 6:42 pm

the fittings in the block are the same, so you don't need a CA18 end. just get an S13 T25 kit.

Post by **float_6969** » Thu Dec 09, 2004 7:43 pm

They're all the sameAnd your sig is a white box with a red 'X' in it..

Post by **BoroBoroS13** » Thu Dec 09, 2004 7:47 pm

So I just need a set of S13 SR20DET T25 lines and they will all work? Cause I want all three lines lol

Post by **float_6969** » Thu Dec 09, 2004 7:51 pm

Post by **BoroBoroS13** » Thu Dec 09, 2004 8:11 pm

Hmmm, that was easy. Thanks

Post by **iliketocrash** » Fri Dec 10, 2004 6:13 am

your sig pic shows up for me

Post by **BoroBoroS13** » Fri Dec 10, 2004 7:37 am

Alright I ordered a set of Taka lines for a S13 SR20DET w/ T25. If it doesnt fit im coming back here to rant. lol

Post by **tyrannix** » Mon Nov 14, 2005 10:43 am

searching > me

what is takas homepage address?

Post by **teddy** » Mon Nov 14, 2005 11:48 am

http://www.takamotorsports.com

Post by **sideways danny** » Mon Nov 14, 2005 11:54 am

you don't want SR lines at all, CA lines will fit the turbo just fine

Post by **bgindn** » Fri Dec 02, 2005 3:26 pm

Hi

No need to rant

The CA lines are the same for the s13sr...it will fit no problem.

Email me at [email protected] if you have any other issues.

thanks

harp

Taka Line Problem

Taka Line Problem

Re: (BoroBoroS13)

Re: Taka Line Problem (BoroBoroS13)

Re: Taka Line Problem (tyrannix)

Re: (BoroBoroS13)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums