t28 ka

[kamikazestorm420]

i tried searching but did not come up with answeres.

anybody here run a t28 with a ka? i heard its small but for ppl who do how much hp are you pushing and at what psi?

[Structure240sx]

i havent hear of anyone using a t28 yet. there is at least one guy running a t25 with very good results. a t28 would be a great setup IMO.

[kamikazestorm420]

or would it be better just to put a t3/t4 hybrid turbo rather than a t28?

as in .. is the t3/t4 worth the extra money?

im only aimin for about 250rwhp, so which would you think is better?

sry for all the questions

[cosmo]

For only 250hp you could just get a T25 or a Z31 turbo

[kamikazestorm420]

thats what i thought .. but a t25 i heard is too small for the ka.

and anybody have any links to a ka manifold with a t25 or 28 flange?

[Structure240sx]

exactly. go withthe t25 its cheaper,easier to find and will spool faster. with a ssautochrome t25 main and sr greddy IC thats a setup i would be jealous of

[kamikazestorm420]

which manifold is very reputable and strong with the t25 flange?

[hannibal]

this thread is talking about the SSA/Stone Racing/Turbo Calc manifold.http://www.nicoclub.com/zerothread?id=76904

In that thread, someone mentions a Fresh Alloy guy making 270whp on a T25.

[574-240sx]

A T28 should be great they come stock on older datsun 280ZX and Z31, I believe. If is supports a 2.8L and 3.0L it should be great on the KA. My friend used the T28 to get his setup running then upgraded to a T3/TO4B. I believe JGS makes the weld together kit and you can opt for a T28 flange. I also like my 50trin T3/TO4E. Nick

[kamikazestorm420]

well .. i heard SSA makes bad manifolds n they tend to crack ..

if i get the jgs manifold, can i jus go to a muffler shop to have them weld on the flange and stuff?

[hannibal]

yep. or you can send it back to jgs and they'll weld it for you