t25 to t28

[highimeric]

Hey what do you need to do to replace a blown t25 turbo on a redtop sr20det in a s14 to a t28 oem s15 turbo?

sorry about the bad wording.....

[forksquared]

gaskets the turbo and i would reccomend some turbo lines. oh and those adapter plates from phase2 to make the intkae and hot pipe match the turbo

[ZiG]

A wrench?

lol, you need adapter flanges for both the compressor inlet and compressor outlet.

I think you need adapters for the coolant lines as well?

[adrianfromthecastle]

ss turbo lines are soo much easier to work with than oem lines.

get taka lines

[highimeric]

ok so i need inlet and outlet adapters, turbo lines, and what kind of gaskets should i buy? ones for the s15 turbo or the s13 motor?

[GTR PrYdE]

What do yall use for coolant lines for a BB T28?! On a KA-T that is.

[ZiG]

rubber hose?

[GTR PrYdE]

rubber hose?

sweet, I thought you might need fittings or adapters, didn't know it was so easy! thanks!

[ZiG]

Well you need hose barbs to screw into the housing of the turbo.. Otherwise it's pretty straightforward.

[Project240]

Also need an oil feed restrictor fitting.

[Morph]

Also need an oil feed restrictor fitting.

I just used the banjo bolt from the oem line(S13 motor) and working fine 2 years counting.

[redtop91]

I think the S15 T28 has a restrictor in it.