T25 at 12-13 psi

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
Twinchy
Posts: 1553
Joined: Wed Feb 18, 2004 10:09 am
Car: Peg leggin 240sx

Post

Hey guys i had a question i got a s13 blacktop w/ fmic,intake and 3in. exhaust. And im boosting about 12-13 pounds right now. Should i be worried about anything going out or is it safe to be boosting that much. Has anyone messed up anything running that much boost on a daily driven car?


User avatar
Mouse6933
Posts: 768
Joined: Mon Jun 26, 2006 12:08 pm

Post

howd u make it too so many posts without SEARCHING,

but u didnt state that u had a fuel pump, i wouldnt go over stock boost unless i had a upgraded fuel pump, but with your fmic,exhuast and if u had that fuel pump u would be all ok to run 12 psi on t25

User avatar
Twinchy
Posts: 1553
Joined: Wed Feb 18, 2004 10:09 am
Car: Peg leggin 240sx

Post

yeah i got a walbaro fuel pump

i tried searching but i wanted to see if anyone had a problems boosting that much for a daily driven car... with some hard abuse at times when it is called for

User avatar
redtop91
Posts: 16325
Joined: Thu Sep 07, 2006 9:05 am
Car: ↑ ↑ ↓ ↓ ← → ← → B A Start

Post

The SR20DET boosts 10-11 psi stock.

User avatar
Twinchy
Posts: 1553
Joined: Wed Feb 18, 2004 10:09 am
Car: Peg leggin 240sx

Post

redtop i got a HKS actuator kit so i can up my boost if i want.. thats why im asking cuz i upped it to12-13 last night and wanted to see if anyone has blow anything running at that psi

User avatar
Mouse6933
Posts: 768
Joined: Mon Jun 26, 2006 12:08 pm

Post

no sir when my car was driving, i ran 13-15 psi most the time for idk 6000 miles, peole have done it for years' all matters on your setup, and previous abuse it took...

ser2102
Posts: 434
Joined: Mon Jul 04, 2005 10:51 am
Car: 91 dead. 90 getting did
Contact:

Post

mine ran at about 12 psi when i put it all together. i had smic and mostly stock stuff. ran like a champ and pulled hard.

User avatar
Twinchy
Posts: 1553
Joined: Wed Feb 18, 2004 10:09 am
Car: Peg leggin 240sx

Post

Cool thanks guys for the help.. i just wanted to make sure everything was cool and that it wouldnt blow anything


Return to “SR20DET Forum (rear-drive)”