Switched Outlet For Fogs

[SpeedyV09]

HELP!

I recently purchased a pair of fog lights for my Versa. I installed them they are Pilot Fog lights. It was nice because it came with relay fuse and all the wring so I didn't need the factory wiring.

My problem is that the switch it came with has a small brass ring on it to receive power but I cant figure out what part of the car has a switched outlet. I want the switch to go on when the car starts and go off when I turn the versa off.

Can anyone tell me where this fuse or switch is that I can use to get power to my fog light switch???

[IMG][/IMG] It is that little metal ring in the top center of the photo where do i put that?????
Modified by thatguy1234 at 1:10 PM 5/6/2008

[illf8ed]

that is a ground wire. When you ground it the switch will light up when the fogs are on. It has nothing to do with power.

[matttail]

dito on the above post, also looks like there's a connector with purple, black and white wires which seems like where it would get power from. Didn't your fogs come with any instructions, or do they have instructions on their website?

[Onyxblue]

You can use a "add-a-circuit" to plug in into the fuse; take a look at zerothread?id=332155

[kcourtad]

what i did is put a switch in with a small LED light on the end of it and put it by my cup holders so i can see where there at...

[SpeedyV09]

Thank YOu everyone, I have talked to the Pilot Lighting company and they have to send me a new pair apparently I guess the ones they sent out were a bad batch with lightbulbs that burned out almost instantenously.

They did come with instructions that were absolutley no help but I figured it out last night. I may have a few more questions I took a picture with my camera phone when the Ring light was still working I didn't have them fully sealed but they are pretty sweet

[IMG][/IMG]

The fog light in the center is a simulated H.I.D white light that still works.

Thanks again for all the help I may still have some questions in the future