swapping old 3.5 to new 3.5, help needed

[eesawah]

Hi guys. I have the teana with the 3.5. Inside my engine looks like this, except that i have a aem intake system, the air filter is not in the engine compartment, it is somewhere infront of the left wheel.





My engine seems to be damaged, and i want to a complete change over to this which is from the 2013 maxima from the usa




I know this is a very difficult project i have undertaken, but i got the new engine with 20k miles for a great price from a 2012 maxima sv. Plus, my teana was only tuned for 225 hp whereas i heard this newer model does 290 !! so it seems to me to be worth it.
I have never did a conversion in a vehicle before but we got all the tools needed.
Ive been told this is what i need
Engine with the manifolds
Cvt
Complete harness
ECM
Transmission Control module
the new engine and transmission mounts
the y pipe
axles ?

Using back my aem intake, is there anything else I will need, and anyone can feel free to give comments on this project that can help me, thanks

[NutriaforBreakfast]

Actron Code Scanner to clear check engine lights

[NutriaforBreakfast]

Actron Code Scanner to clear check engine lights

[eesawah]

anyone knows if my axles would fit the newer cvt?

[eesawah]

any mechanic here to give some advice?

[Fezzik]

you may need to dig into the factory service manual of the two cars and see if the parts are the same. i dont know so I cant help you there.
http://www.nicoclub.com/archives/use-ni ... abase.html