SUPER TWIN S13 MEGA-BUILD THREAD (56k beware (haha))

[Onizuka]

time to invest in a security system! You guys going to get some tuning equipment eventually? yah know, a dyno and whatnot. It would be so awesome to have that kind of stuff nearby.

[idahotuner]

very nice set up.

once i get out of school and such i will get my own set up to work on cars like that.

i probly end up doing side jobs to feed my hobbies.

waht turbo are you going use on the full race mani

[TKOcrewSR]

well there are a few dyno's around one really close and the other at world motorsports. i want to play around with my haltech a little more. Pics of my full-race twinscroll daul wastegate mani coming soon.

[wackawacka]

+1 for properly securing the AC compressor to the bumper.

[EssThrteen20]

Well originally I was going with a TS 3071r because I wanted to drift alot, but in reality the car will see wayyy more street time so I'm going with the TS 3076r to get over 500whp

[TKOcrewSR]

Alright guys i know this is a build thread for the sr's but well while i am waiting for my full-race twin-scroll daul wastegate manifold to get here,I was doing somethings to keep busy my girlfriends evo's front struts were blown so she's got tein mono flex's, down pipe,turbo elbow,and apr front carbon splitter. but here's some pics



allen holding the tein's

[MastaYu]

wow your girlfriend drives an evo wow very cool I wish i had a big garage to work in too

[TKOcrewSR]

Alright guys finally got my full-race manifod its a twin-scroll t3 top mount with daul waste gate flanges.I would have the pictures of the waste gates themselves but full-race is out of stock and on back order.My lovely and sweethearted girl friend is buying my turbo for me soon which will be the forced performance gt30r HTA turbo which if any of you guys know that turbo flows more than your standard gt30r its realy close to the b/w s258 it flow i think 57 lb/hr vs std 52lb/hr and i will be using the twin-scroll housing from full-Race. Here's pics tell me what you think.

[srdub-t]

thats a badass manifold..

[EssThrteen20]

Well I was in the garage all day saturday, in need of getting something done on this project. As soon as I sell my extra Rolling chassis i can get my head shipped out. So i pulled the SR out. By the way, if anyone is in need of a rolling chassis or a DOHC KA24DE let me know.



And some pictures of the new shell for after the motors built. Super clean, No rust

[EssThrteen20]

[MastaYu]

nice its out

[TKOcrewSR]

Alright guys just got my new turbo and mocking everthing up!





NO NO i'm just kidding that's my buddy's precision t101 just having fun with you guys.But i did get my engine and trans out today so heres some pictures of that.Almost have enough saved to send my head to Mazworx for full supertech valvetrain and valves +1mm too,full port and polish,cnc combustion chambers,tomei solid lifters and solid cams with adjustable cam gears.Heres pics of my motor being pulled.

[EssThrteen20]

Pictures of my new front brakes

[THEY what]

Alright guys just got my new turbo and mocking everthing up!

[TKOcrewSR]

Heres some more pictures of my engine for you guys hopfully i will have some more updates.

[h-eater240]

nice garage, love to see these cars in progress. nothing like build threads from day one

[yusk8ing]

thats a really nice garage u guys got!

[TKOcrewSR]

Alight guys did some more at the garage today,had to pull my s14 t28 because i think its sold and start tearing down the the block from accesories.But heres some more pics.

[idahotuner]

I want info on this turbo. that your getting give mea link. it sounds liek one i want. i am planing on a gt3076. but i want 500 on pump gas. which might not be possible lol. but 490 to the wheels or some where in that area would be fine. i was looking at the s258 but i want ball bearings.

[Solow240sx]

Looks like a good build man! Check out my build thread, your not very far from me!!

[EssThrteen20]

well were both doing twinscroll 3076r's. But Phil is getting an HTA compressor wheel, which flows like 5 more lbs/min(57lbs/min). You can read about it at I thinks it's Forced Performance's website. I'm sure he will post more about it later.

[TKOcrewSR]

Thanks it really is hard find tho.

[EssThrteen20]

I'm shooting for over 500 as well also on pump gas, but with meth injection.
Modified by EssThrteen20 at 6:54 PM 3/26/2009

[MastaYu]

^

[TKOcrewSR]

Alright finally got some updates and pics.My tial 44's came in on thursday from full race and i figured i would show you guys the crower rods i've had lying around for a year or so.Also this weekend i pulled the head off my motor and ready to ship out to mazworx for a full build including supertech valvetrain with 6mm exhaust valve conversion,cnc the combustion chambers, stage 1 port job,tomei solid lifters and cams which i will be running 260 270.heres some pics











I Will get some pics of the engine with head off and further progress.

[MastaYu]

^ nice parts. cant wait to see how the engine looks after mazworx builds it

[idahotuner]

it will look just like mine lol.

^ nice parts. cant wait to see how the engine looks after mazworx builds it

are you going to use the dual wastgate manifold?

[TKOcrewSR]

Yea if you look back on the first page i posted some pics of it.