super 60 intake flange....

[wild_maxx]

anyone know where i can get the ford t3 super 60 intake flange.... for the compressor housing?

[Iamjohnhayes]

i would also be greatly interested in this info

[david200095367]

u can use a muffler flange.

[wild_maxx]

i was thinking that.... i'll measure it up tomorrow and find out what size..

[98240]

if it is the 3 bolt flange then the 3 inch muffler flange will work

[wild_maxx]

no its just eh 2 bolt flange... but i should be able to find something

[chmercer]

i just welded an aluminum elbow to mine and clamped on my maf/filter

[98240]

Oh I was thinking about a downpipe. Yeah it is a 2 bolt flange and you can get it from the muffler shop. When I did mine I got one that was as close to the hole as possible then welded washers in place so the holes would line up properly.

[Jookmasta]

ebay is where i got mine...........15 bux shipped i think it was. in reality, u could just use a 2" exhaust flange and then weld a pipe to it so that u can use a coupler b/w the pipe and maf.............

[MarkEmark]

Got mine from atpturbo.com...didn't feel like screwing around with steel and flanges and welding.

It's a one piece aluminum unit and it has an o-ring to seal to the inlet better. Costs $39 though. I checked all over ebay for a few days and couldn't find any that was less than $30.

http://www.atpturbo.com/Mercha...e=FLA

Center of bolt hole to center of bolt hole = ~84 mm or 3 5/16"

[98240]

thats is a nice one i might get one of those

[david200095367]

that is nice looking flange. Im gonna buy one myself.

[david200095367]

anyone know where i can get the ford t3 super 60 intake flange.... for the compressor housing?

if you wait for me to buy one of those nice ones from atp, i can give u my original one.

[wild_maxx]

heck ya i'll take it... any idea when you will get the new flange from atp?

[98240]

I just remebered I have one if anyone wants it just paypal me money for shipping it didnt work right for my setup so I had one made. Just paypal me like 5 bucks or something.

[98240]

here is another shot

The reason it didnt work on my setup is because I reclocked my turbo and the angle in the intake piece wasnt right.

[wild_maxx]

whats your paypal address?

[Jookmasta]

oh i forgot, another trick u can use is search on ebay for a grand national bell housing. same turbo on the GN's use a similar intake thing that ur looking for. ya that's the intake thing tho that is posted in this thread

[98240]

my paypal is [email protected]

[wild_maxx]

payment sent!

[98240]

Cool, I will mail it out tommorow.