Stupid question about TRD 5 lugs pattern

[PalmerWMD]

I am running a post for a collegues son who is selling TRD ( toyota racing development) wheels in 5 lug.

I have heard before, but want to make sure..Is the toyota 5 lug a fit for nissan 5 lug, or are the patterns different?

A nico member is looking at them right now, I want to make sure that those TRD can fit a nissan 5 lug?Or are we all smoking dope?

Fred..

[skydragoness]

Hey Fred, I found this:http://www.discountedwheelware...e.cfm

Does the auction or whoever selling it know what car its off of? Some Toyota's have 114.3 patterns some don't.

[PalmerWMD]

I am talking about this set:zerothread?id=124734

hope thatn helps

Fred..

[elwesso]

Fred.... What model toyota did they come off of!

[szh]

Hi, Fred.

I do not know about these wheels per se, but it is my understanding that the Toyota's use a different hub bore size. So, they cannot fit cleanly (I forget whether you have to use centering rings or have to bore out the wheel - it depends on which way you are going, I guess.)

Z

[elwesso]

lexus uses a 62mm bore I think if memory serves..

[chmercer]

my gut tells me thoes are 5x100, but i couldnt be sure. i think they come from a celica?

[gobstopper]

5 bolt Toyotas (bigger cars, all/most trucks) use a 5 on 114.3 (5x4.5) bolt circle, but I'm not certain of the hub bore. That will be your sticking point, along with offset (maybe).

Not sure about small Toyotas (Corolla, Celica, etc.) since most of my experience with wheels for them is with a Supra and a handful of pickups.

[SmithSR]

It took a long time to make up the list of sizes and hub bores found in the info sticky:zerothread?id=81407

Small pattern Toyotas use 54.06mm

Large pattern Toyotas use 60.06mm

There is no hub-centric Toyota wheel that will fit a Nissan.

As a general rule, Nissan uses one of the largest hub bores in the industry.Rarely if ever is this proven wrong

Always sell Nissan/Infiniti 5-114.3(5-4.5") wheels to your friends, but never buy other brand wheels.

[PalmerWMD]

sr smith thanks for your help!

I will modify that FS post.

Fred..