stumble off idle at first throttle blip

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
srpowered240sx
Posts: 12661
Joined: Wed Jun 29, 2005 1:17 pm
Car: 90 240sx-sr, 92 F-150, 00 bmw 323ci, 1991 s13 coupe, 99 F250 Dsl

Post

having issues with the sr. it idles perfect, but after warming up a few minutes, i blip the throttle to get things going, and it just falls on its face. wont take throttle, seems to work past it but still misfires a little. the tps tests ok after the car is warmed up, but is showing .092 volts when its cold and the throttle is closed. my safc2 shows the throttle position percentage on it, but when i feed it throttle, the percentage stays 0, then after trying to rev it finally starts to catch up. i thought it was the tps acting odd, but the ecu gives code 55, so it isnt pointing at anything in particular. anybody who has had this problem know the solution?


User avatar
Sil80315
Posts: 1084
Joined: Mon Jan 30, 2006 4:34 pm
Car: 1991 Nissan 240sx
Contact:

Post

reguardless of how warm the motor is the TPS shows only one correct voltage. and at closed throttle it should read .45 volts I would check the sensor out with the car turned on but not started with a volt meter

duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

Replace your TPS


Return to “SR20DET Forum (rear-drive)”