stuck

Discuss the RB20, RB25 and RB26 series engines.
MoToG
Posts: 82
Joined: Fri Oct 10, 2008 2:01 pm
Car: rb20 240sx

Post

ok well about 2 months ago i blew my ecu, ignitor box, and my c.a.s-cam angle sensor. got a stock ecu no chip, and a ecu with a chip, switched over to the j30 ignitor, and got a new c.a.s. put all the stuff in car started and ran like **** wont evan chirp 2nd gear when b4 i would spin 3rd so obviously somethings wrong, so i put in the chiped ecu and it ran better but still no power. checked 4 boost leaks everything is fine still running 7 8 pounds. and all it does is dump gas like it burns my eyes thats how much its dumping everything is stock on the motor besides the front mount and a ebay rs b.o.v. all my friends think its a tune but i dont really know where to go from here helphttp://forums.nicoclub.com/zeropost?cmd=newtopic&id=135#


Joe
Posts: 6511
Joined: Sun Feb 09, 2003 8:29 pm
Location: Phoenix, AZ

Post

you need a proper tune not a generic chipped ecu.


Return to “RB20DET / RB25DET / RB26DETT Forum”