Post by
streeteg »
https://forums.nicoclub.com/streeteg-u61203.html
Fri Jan 22, 2010 11:06 am
Ok Ladies and Gents today was finally the day I was able to get my car on the dyno and make some power. The first time i made it to the dyno my MAF voltage was maxing out almost instantly due to the pressure built up by an inefficient filter (Hours of research later)
The Shop that did the tune was R/T tuning in Lansdale PA. I have been to my fair share of shops and this by far was the most professional well run place ive ever been to. Right down to business, knowledgeable staff and great equipment.
Anyway Here is the setup.
s2 Rb25detStock MAFIntake w/ no filterEbay FMICGreddy Type-s BOVGreddy intake manifoldHalman Boost controller (although boost control is a big issue I will be fixing upon the turbo upgrade because the boost started at 8 lbs, crept to 12 then fell off to 10 at the endYellow Jacket Coil PacksNGK iridium 1 step colder plugs @ .32 gapstock turbo elbow DP thingy3" exhaust from that elbow back to a HKS Carbon Ti Muffler, no cat no resonator.Stock Injectors @ what I think was almost 90% duty cyclebumped redline to 7k
The results uncorrected were I think 290whp and 243tq. The Maf was near maxxed out, as were the injectors.
The car is a 74 260z- that tips the scales at 2450lbs.
Anyway, below is the car and the dyno. I did a quick butt dyno launch outside my house and it is night and day.
thanks guys!