straight up wiring

[420_240]

I got my harness back from mckinney today and i started installing it.... i'm just confused on some of the plugs so i took some pix and i was hoping i could recieve some guidance on where the hell this stuff goes.....

[420_240]

brake actuator?

[420_240]

i plugged in the EFI harness into the ecu... and i have 2 blue plugs and a white plug left..... don't know where they go... need some help

-i used the rb radiator... it has two hoses that are on the bottom backside of it.... they were cut and i don't know where they lead to.... need some help

[Spazz]

in the manual it says the A/T oil cooler hose, and maybe one of the plugs goes into the rad?

[rb250sx]

well i cant see your pictures, but if its a small blue and orange plug, its your map sensor, hiding behind some hoses on the pass side.

[420_240]

Here's a picture of the hose on the driver's side.... .there's another hose .... same size ... on the passengerside of radiator... hope that helps a little more

[420_240]

Ok nvmd about the hoses on the radiator... spazz, the manual is correct, the hoses are for auto transmission only