stock sr injectors.. need help

[siks13sr]

alright this might sound like a stupid question but how do you get the injectors out of the fuel rail on an sr?? I just cant get them out.........

[Henry G]

very carefully.. I haven't pulled mine yet, but you need to do a combonation of pulling and pushing it out at the same time.

[Onizuka]

Dont push, you will break the plastic tabs on the end. I gently pryed with a super thin flat head screw driver between the plug and fuel rail. Once it was up just a little, I stuck another flathead screwdriver on the other side and slowly pryed back and forth until it just poped out. No damage to the injectors this way.

[siks13sr]

alright.. thanks guys

[rudee023]

put the screws back in about halfway without the injector cap and use them to pry against as you insert a small flathead screwdriver in the holes on the sides of the injectors. Hope it made sense.

[Henry G]

So, did you break any?

[siks13sr]

ha..... well i cracked a little piece on the top when i was trying to pry it out with the screwdriver but it should b alright... Thanks