Stock rb25 turbo boost pressure?

[DLeeTT]

I tried searching and mostly got results of max boost. I'd like to know what is the stock pressure of the stock turbo so when I get this thing running, I know it's set right. Thanks.

[Darius]

If I remember correctly, stock boost is 5psi and it steps up to 7psi via the boost control solenoid on the waste gate actuator.

[DLeeTT]

hmmm i don't think my swap came with a boost solenoid... guess it should be at 5psi then?

[andres14oj]

7 actually. the boost solenoid controls your wastergate actuator to open up early at 5 psi during low rpms i bealive. without it u run 7. this solenoid is bolted on the power steering reservoir

[jbracy7]

My rb runs at 1.6-2.1 ish bar not sure how to convert that into psi

[DLeeTT]

1 bar is close to 15 psi

[jbracy7]

^ really I don't think my gts stock then I should have known from the tommy akira bits and pieces p.s. I'm not spelling this guys name right my japanise is high school level at best

[LSDrift]

That would mean you are running 23-30 psi. And it's Tommy Kaira just fyi...definitely not stock boost lol. Darius is correct. If you have a vac hose going from the wastegate directly to the intake manifold you should see 7psi.

[DLeeTT]

Thanks

[jbracy7]

Now I must get my car together,lazzines be gone

[DLeeTT]

Now I must get my car together,lazzines be gone

That is my curse as well

[mixeds14]

Make that three.. I feel lazyyyyy as I type this s***