stock motor and manual transmission swap

[exit7aracing]

i have gotten my hands on two ka motors and have one manual transmission. i did this in the hopes that if i needed to i could strip parts off one motor for the other if need be... my question right now is what specifics do i need to know about mounting the manual transmission to the ka motor that was originally auto transmission.

also does anyone have a spare manual transmission they might be interested in selling. im looking fo rone in good condition.

[krash]

all the info you need is available via search

but either way, you're going to need the MT flywheel/pressureplate/blahblah and a pilot bushing. other than that I'm pretty sure it just bolts right on. good luck man!

[gingerbredman]

I think you have to swap the dust plates (the big flat piece of metal between transmission and block) and the cross member, I can't recall what else. I know it's on here somewhere, you'll find if ya search, gl in the meantime

[Eikon]

Check out the 'vert forum sticky threads.. you won't believe how much incredible information we've accumulated in the past 5 years. zerothread/199318

Here's one from that sticky that walks you through the 5 speed swap.

zerothread?id=77784

Don't be afraid to dive in there and get your hands dirty. We'll walk you through any specific issues if you get stuck.

Good luck!