stock ka24de 270cc injectors+boost..??

[kaytech83204]

I'm gettin ready to boost another ka, this is the idea: walbro 255lph fuel pump, turbonetics t3 charger, mandrel manifold, 38mm wasetgate, emance tuned ecu, N60 MAF, ... and stock injectors + 6psi spring in the gate. I've heard you can run 10 psi on stock injectors and I dont plan on running any more than the 6psi spring, soo is it do'able??

[s14derrick]

if you are going through all the trouble of getting a tune and a different maf why not just spend the extra 100 for some used sr injectors?

[kainvamp]

if your gonna go through with everything else, theres really no reason not to just upgrade to the 370's

[Tyler]

its only doable if you run an 8:1 fmu for fuel management. and dont go over 7 psi on an fmu set up

[kaytech83204]

right now I can get a set of 385cc injectors from a Q45 for $50.. but I can't figure out if they'll work from pics, they have a different looking pintle cap... does anyone know if they'll work?

[kaytech83204]

nevermind:( I know they wont work now.. anyone have 370cc's layin around??

[heartofaskyline]

sure. 80 bucks plus shipping and there yours. lol. my email is in my profile if your interested

[chaosli]

y just go for 370cc go for the 550 from a FD everyone i know with a fd has up graded to like 1300 so they r bound to be some where.

i got the single cam and got 460 from FC

[AZ89two4Tsx]

Keep stock injectors, no tune and just use an FMU. Be sure to retard the timing a few degrees on the dizzy and keep it under 8psi.

Otherwise if you're getting a tune, get bigger injectors. And I haven't heard many good things about Jason/Emance so I'd go with another tune. Good luck.

[kaytech83204]

what tune do you guys live by?

[OM3GA]

JWT

[kaytech83204]

I haven't heard anything good about jwt for a while now.. i think I'll still go with emance, I've been talking with jason for some time now and he's made it sound as if I wont be disappointed. were buying three ka24de kits, one z32 kit, and one sentra se-r kit, and thats justo for a start.. soo I'm sure he wont screw us, our group will probably all tune with his programs.. I'll let you guys know how the se-r tune goes, it will be the first setup.

[Tyler]

so you ask for advice, you get it from many soild memebers here, then do the exact opposite of what we told you.

[kaytech83204]

I'm not a drone and can think for myself, jwt gave me the runaround when I needed answers pertaining to my tuning needs and jason answered all my questions very quick. it would have been an easy choice to go emance, but I found a local that will tune and dyno my setup to my paramiders for $350. and I guarentee its the better choice. just because I'm new-ish to this forum doesn't mean im not intelligent enough to think outside the norm.

[24j0hn]

id say just go with 370cc injectors and go with a enthalpy tuned ecu... the ecu is on ebay and already has a setup for 370cc and wat ever u were gunna put

[kaytech83204]

I was seriously considering it, but over the weekend I saw one of the cars this local guy tuned run and it was flawless. I have a friend that is buying an enthalpy ecu at the end of the month and if it is as good as people say I might change my mind and do the same. I wont be ready for my install until the middle of june so I have a little time to consider my options. how is enthalpy customer service?

[heartofaskyline]

so you want these injectors?

[kaytech83204]

can ya go cheaper:) not tryin to cheat ya err anything, but I've been finding them for about $65+shipping. it's cool if not

[heartofaskyline]

take em for 65 and run. deachwerks will give you 100 bucks for em, so i thought 80 was a hookup lol

[kaytech83204]

actually the guy that has em is an sr nut, and has two sets of them and will let me have em both for $120! I think he's strap for cash err somethin, but im gonna grab both sets up for sure