Stock Clutch Q

[Steve Lloyd]

I read the sticky and found this:

Clutch 89 Nissan Maxima 240mm 9-7/16" spline 24x1

Only problem is every plave I look the clutch is listed as a 9 1/2" instead of 9 7/16" I am broke and need to get my swap done so I just wanted to get a stock clutch. Any help would be GREAT...................

Also, where can I get the fork boot from?

-removed a bunch of question marks from the title. Don't need that many -tenkawa_akito
Modified by Steve Lloyd at 3:06 PM 11/15/2006

[Hijacker]

the stock SR clutch disc is 240mm wide which roughly converts to 9.44 inches (which is a hair under .5 inches, so you can guess that it's the 7/16s you're looking for which is a hair under 1/2 (8/16s))

[Steve Lloyd]

I understand that, but WHERE can I get a 9 7/16" clutch??? No one sells one that I have found.......

[S13240]

Your motor didn't come with a stock clutch that is still in good condition? If you're strapped for cash, no need to buy a new one if the used one is still in good condition.

[Steve Lloyd]

the used one was burned up, so was the flywheel. I tried to get the fly turned and there wasn't enough meat for them to feel good about doing it. That's what ate up my clutch money.

[Steve Lloyd]

http://www.clutchcityonline.co...shtml

Would this clutch work???

[Hijacker]

yes

[ILikeMy240sx]

I bought a clutch disk for a 89 Maxima and used on mine. It held for stock T25 boosting at about 12 psi.

GT2871R boosting at 18 psi was a completely different story.

[Blown240sx]

Trust me the Maxima one is the right one. Just cause the clutch plate is slightly bigger doesnt mean it wont work cause I used one.