Hey guys,
This is kinda a tradition for me, so, here are some pics and thoughts.
Install was easy and straight forward. You have to drill your own holes in the new corners, but its not a problem. Just take the old ones off, 2 screws on the sides, and 1 clip on the bottom (don't worry if you break this clip, you wont need it again). Eye up where you need to drill your new holes. I hit it on my first try. Then, just peel the backing off the adhesive, and mold the rear corner on the bumper with your hand. PRESTO! Your done All in all, about 25 min for both sides.
STILLEN Rear Corners INSTALLED
Re: STILLEN Rear Corners INSTALLED (adidas2go)
Thanks, Blake! Looks great!
That was my plan for spending my Stillen bucks, so it's a definite go after seeing yours!
That was my plan for spending my Stillen bucks, so it's a definite go after seeing yours!
-
xfactor0707
- Posts: 445
- Joined: Thu Jun 26, 2008 8:24 am
- Car: Nissan Altima Coupe 2.5s
- Contact:
Re: (phobs)
NICE
-
Rmuth25
- Posts: 661
- Joined: Fri Dec 07, 2007 11:27 am
- Car: 08 Altima Coupe 2.5s CVT [Premium & Tech Packages]
Re: (xfactor0707)
They look great. Gotta love all the eagles fans with all this renewed and reinvigorated enthusiasm about their team!
-
Bmore-coupe
- Posts: 6440
- Joined: Fri Sep 26, 2008 4:00 pm
- Car: 08 Altima Coupe 3.5
- Location: Baltimore, MD
Re: (Rmuth25)
look great! picking mine up tomorrow from paint and installing them hopefully as well.
Re: (Bmore-coupe)
that looks sick...
Re: (phobs)
+1 ...very nice indeed....phobs wrote:Good stuff, those rear corners really do complete it.
-
adidas2go
- Posts: 4495
- Joined: Thu Oct 18, 2007 9:49 am
- Car: Cycle through all kinds of cars, trucks, motorcycles, and boats 🤙
Once upon a time: 1st turbo Altima Coupe - Location: Raleigh, NC
Re: (Rmuth25)
Well, my avatar was Virginia Tech, but, since they already won the Orange Bowl , I now change it to my team who needs the most supportRmuth25 wrote:They look great. Gotta love all the eagles fans with all this renewed and reinvigorated enthusiasm about their team!
-
alt.coupe28
- Posts: 141
- Joined: Sun Aug 24, 2008 8:58 am
- Car: 2008 Altima Coupe 3.5 CVT
-
II Knucklez II
- Posts: 332
- Joined: Mon Sep 17, 2007 6:02 am
- Car: Altima Coupe 3.5 6MT
- Location: Miami, FL
Re: (adidas2go)
Go Miami!!!!
-
dangeris
- Posts: 5139
- Joined: Wed Sep 19, 2007 6:18 pm
- Car: 08 Code Red 3.5
08 BMW 328xi Coupe
90 300ZX 2+0 NA - Location: Lansdale PA
- Contact:
Re: (II Knucklez II)
Very Nice! Looks very clean and subtle. Not as aggressive as the ED rears. Good job Blake!
-
FGFCacoupe
- Posts: 683
- Joined: Tue Jan 01, 2008 6:12 pm
- Car: Super Black 2008 Nissan Altima Coupe 3.5 SE
Re: (dangeris)
+1 mine are in the paint shop as well
-
SHIFT_COUPE
- Posts: 3887
- Joined: Fri Aug 03, 2007 3:36 am
- Car: 2014 Infiniti Q50 AWD
- Location: Bethel, CT
- Contact:
-
missmedude
- Posts: 138
- Joined: Mon Jun 25, 2007 8:00 pm
- Car: 2007 Altima
-
adidas2go
- Posts: 4495
- Joined: Thu Oct 18, 2007 9:49 am
- Car: Cycle through all kinds of cars, trucks, motorcycles, and boats 🤙
Once upon a time: 1st turbo Altima Coupe - Location: Raleigh, NC
Re: (missmedude)
I haven't been in contact with STILLEN since I left last month. I would contact them over there for more information.
-
kyle@stillen
- Posts: 752
- Joined: Wed Dec 12, 2007 7:12 am
Re: (missmedude)
Unfortunately we havent had the time to bring in a sedan yet. Our modeling shop is jam packed with projects right now like the GTR, G37, Ford GT, and more...We will get to it as soon as possible.