Still no heat.

[240nessx]

Hey so some have you have probably seen that for the past couple months I've been trying to fix my heat situation. I've replaced the Radiator, thermostat, radiator cap, and now the heater core. Im more then positive to assume theres no air in the lines, because when there was, it would overheat as soon as a load was put on the car. I let it bleed with a Lisle spill-free coolant funnel for about 1-1.5hrs. I drove the car around to see if i would get heat and theres nothing. Its as if the climate control switch is on cold. I made sure the block-off valve in the upper heater core line worked and it does. But when I put my hand on the heater core hoses, neither of them are hot. So is there a possibility that theres a blockage in the lines somewhere?



From that picture it looks as if the blockage would be coming off the block. Also could i have the heater core hoses mixed up? Or would i still get heat just not as much.