Start up Prob.

[Thanielson]

so the other night i moved my ecu over to see the part number for when i order nistune went to bed the next morning i went to start it up to go to work all it would do is crank over. i check to make sure it is geting fuel it is had some spare coil packs plug one it to cyl 1 to see if it was fireing but it isnt. i moved the ecu maybe 4 inches out side ways leaveing the bottem were it was it is a er34 neo ecu and what all wire do you guys think could have been pulled or cut by moving it a matter of 4 inches. ganna go check 2 threw 6 now to see if they are fireing but i would think if they were it would still start but would run like s***.

[240daveTX]

make sure the bolt is tightened to the ECU

[Thanielson]

it was.

[Thanielson]

bump.

[Thanielson]

so after doing a lil more digging i got my consultin cable back and iom geting a code 11. telling me i maybe pulled some cas wires or do you guys think i could have messed up the cas im geting my voltage meter from work tommarrow to check it.